菜单
  
    摘要气动技术具有一系列显著优点,在工业生产中得到了越来越广泛的应用,己成为自动化不可缺少的重要手段。进入90年代后,气动技术更突破传统死区,经历着飞跃性进展。气动伺服技术作为本学科的前沿研究领域,备受人们的重视。气动伺服定位技术已能使气缸在高速运动下实现任意点高精度定位,突破传统的气动定位方法。基于现代工业在物流自动化上的需要,本文研发了一种新型的气动伺服输送机。35493
    本课题针对某一元件的生产装配线,对元件端盖的移动和定位进行分析和控制,要求采用气动伺服系统,设计一套相应的气动控制回路,确定系统的原件和控制参数,选取合适的气动驱动元件和伺服控制元件。
    整个工作台由X、Y两个方向的导轨,元件端盖从A点出发,移动至D处后需较为精确地停下,在D处加装一工件。加装完毕后移至B点,最后移到C处后由机械手抓将安装好的元件端盖取走,完成整个加工过程。在加工过程中,要注意到整个导轨的移动是由气缸提供动力,由于气体的可压缩性,到达D处的定位难度大,需要重点考虑其定位控制。
    全文对整体的工作台外形进行了设计,并选用了THK公司生产导轨作为零部件的支撑以及导向,同时选用康茂盛公司生产的无杆气缸作为驱动工作台的元件。另外设计了一套气动吸盘式机械手抓系统,完成工件的取放工作。整体的气动控制比例流量阀对的直线驱动单元进行控制,通过上位机将系统的各项参数输入至控制系统中,再由系统根据已设定的程序,控制驱动工作台的行动。
    关键词:    气动伺服;工作台;气动吸盘式机械手抓;数学模型
    Design of pneumatic servo platform
    Abstract:     Pneumatic technology has a series of remarkable advantages, and it has been widely used in industrial production, and has become an important means of automation.. After entering the 90's, pneumatic technology more breakthrough the traditional dead zone, experiencing a leap forward. As the frontier research area of this subject, pneumatic servo technology has received much attention.. Pneumatic servo positioning technology can make the cylinder realize arbitrary point and high accuracy in the high-speed movement, and break the traditional pneumatic positioning method.. Based on the need of modern industry in logistics automation, this paper develops a new type pneumatic servo conveyer.
        This topic for a component assembly lines, motion and orientation of the element end cap for analysis and control, require the use of pneumatic servo system, design a set of corresponding pneumatic control circuit, system of the original and the control parameters are determined and selected suitable pneumatic drive original and servo control of the original.
         The whole workbench from the Y, X two direction of the guide, the component end cover from the point of D, after moving to the A is required to more accurately stop, a workpiece in the D. After the installation of the end of the move to the B point, after the final move to the C after the mechanical hand will be installed to remove the component cover, complete the entire process. In the process of machining, it is important to note that the movement of the entire rail is provided by the cylinder. The compressibility of the gas reaches the difficulty of the positioning of the D..
       Full text of the overall shape of the design, and select the THK Corporation production guide as parts of the support and guidance, at the same time, selection m.autom. Company produces cylinder rod as worktable driven components. In addition, a pneumatic chuck manipulator is designed, and the work of the workpiece is finished.. The overall gas dynamic control proportional flow valve on line to control the driving unit, through the host computer system parameters input to the control system, by the system according to the procedures set control drive the action.
  1. 上一篇:轴类零件表面缺陷电磁自动检测装置设计+CAD图纸
  2. 下一篇:仪表外壳成型工艺分析与模具设计+CAD图纸
  1. 吸附式高楼气动擦窗机器人设计+CAD图纸

  2. fluent45mm冲压炮弹气动及结构设计

  3. 数控直线落料机滚轮工作台设计+CAD图纸

  4. 数控直线落料机堆放工作...

  5. ANSYS直接驱动的小型高精数控回转工作台设计

  6. MATLAB电液位置伺服系统的...

  7. 基于气动力―外弹道耦合...

  8. 十二层带中心支撑钢结构...

  9. 酸性水汽提装置总汽提塔设计+CAD图纸

  10. 乳业同业并购式全产业链...

  11. 当代大学生慈善意识研究+文献综述

  12. 河岸冲刷和泥沙淤积的监测国内外研究现状

  13. 中考体育项目与体育教学合理结合的研究

  14. 电站锅炉暖风器设计任务书

  15. 大众媒体对公共政策制定的影响

  16. 杂拟谷盗体内共生菌沃尔...

  17. java+mysql车辆管理系统的设计+源代码

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回