菜单
  
    摘要硬旋铣加工系统的大跨度弱刚性、变浮动支撑约束以及多刀具断续切削等特殊性使得其动态响应特性有别于传统加工方式,为降低工件振动变形幅度以进一步提高加工质量,以汉江自主研发的八米丝杠旋风铣床为对象,将丝杠工件简化为瑞利梁,将卡盘和顶尖分别简化为固定端和滑动绞支端,将浮动支撑和抱紧装置简化成线性弹簧约束,基于模态型函数建立了三向移动力作用下的大型螺纹旋风铣削系统动力学模型,其中全面考虑了工件自重以及自转,随动抱紧装置质量,耗散能和轴向振动变形等因素。进而基于matlab/Simulink对所建立的动力学模型进行数值求解,研究了均匀布局条件下的浮动支撑个数影响规律以及丝杠工件加工全长的动态响应特性;并基于遗传算法研究了非均匀布局条件下浮动支撑的最优布局。结果表明:最优浮动支撑个数为3个,并且2.009m,3.916m和5.113m的非均匀位置布局可以取得更好的减振效果。28102
    关键词  螺纹硬旋铣 动态响应 变支撑约束 动力学模型 Simulink仿真
    毕业论文设计说明书外文摘要
    Title  Dynamic response of hard whirling for large-scale thread   ubder variable support                    
    Abstract
    The particularity of the hard turning and milling machining system including large span and weak rigidity, floating support constraint and intermittent cutting with tools make different form the traditional processing method, eight meters screw whirlwind milling machine which developed by the Hanjiang taken as the research object, simplified the screw artifacts to Rayleigh beam, simplified the chuck and the core clamper to the fixed end and sliding hinged end respectively, and simplified the floating support and hold device into linear spring constraints, according to the GAMM,the dynamic model for large-scale thread workpiece system under the role of the three mobile force was set up, with comprehensive consideration of more factors, such as the weight and the rotation of the workpiece, the quality of the servo hold device, dissipated energy, the axial vibration deformation and so on, in order to reduce the vibration of the workpiece to further improve the quality of screw machining. The established dynamic model has been solved numerically based on MATLAB/Simulink, then the effect of the number of the floating support under the condition of uniform distribution and the dynamic response of the screw length workpiece machining features have been studied. And the floating support optimal layoutis under the condition of non-uniform layout has been also studied based on the genetic algorithm. The results show that the optimal number of floating supports is 3, and the layout of the non-uniform position of 2.009m, 3.916m and 5.113m can achieve better vibration attenuation.
    Keywords Thread hard whirling, dynamic response, variable support constraint, Dynamic model, Simulink simulation
     目   次
    1  绪论 1
    1.1引言1
    1.2课题背景及研究工作2
    1.3螺纹旋铣技术与设备国内外现状2
    1.3.1螺纹旋铣技术国内外现状2
    1.3.2螺纹旋铣设备国内外现状3
    1.4课题关键难题研究方式现状4
    1.5课题主要研究内容7
    2  大型螺纹旋风铣削系统的动力学建模8
    2.1引言8
    2.2大型螺纹旋风铣削系统动力学方程8
    2.3动力学方程边界条件14
    2.4旋铣激振力的假设15
    2.5各参数值的确定与方程求解17
    2.6小结19
    3  变支撑约束下的大型螺纹旋风铣削系统动态响应分析21
    3.1引言21
    3.2均匀布局条件下动态响应分析21
    3.2.1全长动态响应分析21
    3.2.2大型丝杠自重以及辅助装置阻尼对加工系统动态响应的影响24
  1. 上一篇:基于CPLD的弹载数据存储器的设计+Modelsim仿真
  2. 下一篇:搭载摄像头二维随动平台设计+文献综述
  1. MATLAB某反后坐装置的优化设计

  2. MATLAB枪弹射击精度影响因...

  3. 燃烧室容积可变的小型膛压模拟器设计

  4. 面向增材制造的三维模型...

  5. MATLAB排爆机器人稳定平台二维随动控制设计

  6. SolidWorks康复用膝关节支撑工具的设计与制造

  7. MATLAB直流电动机控制建模及转速控制算法设计

  8. 乳业同业并购式全产业链...

  9. 电站锅炉暖风器设计任务书

  10. 大众媒体对公共政策制定的影响

  11. 河岸冲刷和泥沙淤积的监测国内外研究现状

  12. 酸性水汽提装置总汽提塔设计+CAD图纸

  13. 当代大学生慈善意识研究+文献综述

  14. java+mysql车辆管理系统的设计+源代码

  15. 杂拟谷盗体内共生菌沃尔...

  16. 十二层带中心支撑钢结构...

  17. 中考体育项目与体育教学合理结合的研究

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回