- 上一篇：HNBR的研究现状
- 下一篇：改性炭黑-白炭黑双相粒子对天然胶性能影响研究
摘要本论文在本课题组和已有文献研究工作基础上，对50%阳离子度丙烯酰氧乙基三甲基氯化铵和丙烯酰胺共聚物（P(DAC-AM)）的聚合工艺进行了初步探索。以简单浓缩后工业丙烯酰氧乙基三甲基氯化铵（DAC）阳离子单体和丙烯酰胺（AM）单体为原料，以V-50为引发剂，采用引发剂一次性加入-两步升温的方式，以产物特征粘度为指标对单体起始质量分数w(单体)、引发剂用量占单体的质量比m(V-50): m(单体)、助剂用量占单体的质量比m(Na4EDTA):m(单体)和聚合反应温度（T1、T2）对50%阳离子度（P(DAC-AM)）制备工艺进行单因素优化研究，初步得到P(DAC-AM)的较佳制备工艺条件为：w(单体)=43%，m(V-50):m(单体) =0.10%，m(Na4EDTA): m(单体)=0.03%，T1=52.0℃，T2=65.0℃，制备出特征粘度值为13.35 dL/g，单体转化率为92.46%的P(DAC-AM)胶体产物。为高相对分子质量50%阳离子度P(DAC-AM)的制备工艺的进一步优化创新打下基础。63627
毕业论文关键词 丙烯酰氧乙基三甲基氯化铵，丙烯酰胺，共聚，偶氮引发剂，工艺,特征粘度， 转化率
毕业设计说明书（论文）外文摘要
Title Preliminary exploration of synthesis of P(AM-DAC) with 50% Cationicity in azo initiator system
Abstract
Based on our group’s research work and existing literature , the polymerization processes of poly(acryloyloxyethyltrimethyl ammonium chloride-co-acrylamide) (P(DAC-AM)) with cationicity of 50% were studied in this paper. Using simple concentrated industrial acryloyloxyethyl trimethylammonium chloride (DAC) cationic and acrylamide (AM) as the monomers ,V-50 as the initiator , the preparation technologies via a method of adding the monomers in a lump and increasing temperature stepwise were investigated by using the intrinsic viscosity as qualitative criterion. 5 influential factors :w (monomer), m(V-50): m(monomer), m(Na4EDTA):m (monomer) and polymerization temperatures (T1, T2 ) were studied . The optimum conditions were as follows :w(monomer) =43.0%, m(APS):m(DAC) =0.10%, m(Na4EDTA):m(DAC)=0.03%, T1=52.0℃and T2=65℃. The intrinsic viscosity of P(DAC-AM) colloid product was 13.35dL/g, and the monomer conversion was 92.46%. The present work has constrected a foundation for the further study on synthesizing high molecular weight P(DAC-AM) with 50% cationicity .
Keywords ：acryloyloxyethyltrimethyl ammonium chloride，acrylamide，copolymerization，azo initiators ，technology，intrinsic viscosity，monomer conversion
目 次
1 引言 1
1.1 概述 1
1.1.1 丙烯酰胺(AM) 1
1.1.2 丙烯酰氧乙基三甲基氯化铵（DAC） 1
1.1.3 丙烯酰氧乙基三甲基氯化铵-丙烯酰胺共聚物（P(DAC-AM) 2
1.2 P(DAC-AM)的应用 2
1.2.1 污水处理方面的应用 2
1.2.2 造纸工业方面的应用 3
1.2.3 石油开采方面的应用 3
1.3 P(DAC-AM)共聚反应方法 3
1.3.1 水溶液聚合法 3
1.3.2 反相乳液聚合 4
1.3.3 其它聚合方法 4
1.5 存在问题 6
1.6 本课题的研究内容和意义 7