菜单
  

    摘要:本实验研究的是在不同功率下超声辅助硫酸-柠檬酸浴直流电电镀镍钼合金的影响。主要研究了超声参数对镍钼合金镀层的微观结构、晶粒尺寸、硬度、钼含量、表面粗糙度、耐腐蚀性的影响。XRD表明超声波降低了纳米晶合金镀层晶粒尺寸。在超声辅助下镍钼镀层镀层的硬度显著提高。SEM和AFM图像表明有超声结合镀层表面粗糙度降低,得到光滑的镀层。由塔菲尔极化曲线和电化学阻抗谱发现,与无超声波辅助的镀层对比有超声波辅助的镍钼镀层耐腐蚀性显著增强。沉积物的特性依赖于所采用的超声功率,但在最大超声波功率(270瓦),镍钼合金镀层的钼含量、晶粒尺寸,粗糙度、显微硬度和耐腐蚀性的都略有下降。58137

    毕业论文关键词: 镍钼合金镀层;电沉积;超声波;耐蚀性 

    Effect of ultrasonication on the surface of low-carbon steel to produced Ni–Mo coatings

    Abstract: The effect of ultrasound-assisted method on Ni–Mo alloy coatings by direct current (DC) electroformation from sulphate–citrate bath was investigated with different ultrasonic powers. This study focused on the microstructure, grain size, hardness,molybdenum content, surface roughness and corrosion resistance of the Ni–Mo alloy coatings, which were influenced by the ultrasonic parameters. X-ray diffraction results showed that ultrasonic modification decreased the grain size of nanocrystalline alloy coatings. The hardness of Ni Mo coating was significantly improved by ultrasonic assisted. SEM and AFM images show that there is ultrasound-assisted, the surface roughness of the coating is reduced, and the smooth coating is obtained. By Tafel polarisation curve and electrochemical impedance spectroscopic found, the corrosion resistance of Ni–Mo coating was significantly enhanced compared with the coating without ultrasonic assistance. Characteristics of sediment from dependence on the ultrasonic power, but at maximum ultrasonic power (270 watts), the molybdenum content, grain size, roughness, microhardness and corrosion resistance of the Ni–Mo alloy coatings all slightly decreased.

    Keyword: Ni–Mo alloy coatings;Electroposition;Ultrasonic;Corrosion resistanc 

    目录 

    1 绪论 1

    1.1前言 1

    1.2文献综述 1

    1.3合金共沉积 2

    1.3.1合金共沉积的条件 2

    1.3.2合金共沉积的类型 3

    1.4超声波电镀镍 3

    1.5超声波电镀铜 4

    1.6超声波电镀锌 4

    1.7超声波电镀镍基合金 4

    1.8超声波电镀镍基复合镀层 5

    1.9超声波对电沉积的作用机理 6

    1.9.1强化电沉积过程 6

    1.9.2搅拌分散作用 6

    1.9.3除气和除杂作用 6

    1.9.4清洗和活化作用 6

    1.9.5细化镀层晶粒 6

    2 实验方法与仪器 7

    2.1 实验材料与实验仪器 7

    2.1.1实验材料 7

    2.1.2 实验仪器 7

    2.2 实验过程 7

    2.3 镀后样品检测

  1. 上一篇:Evans辅基的合成研究+文献综述
  2. 下一篇:年产9万吨1,3-丙二醇车间设计+图纸
  1. 基于非对称六羧基配体的...

  2. 含脲基的金属-有机框架材...

  3. 高频导磁体对填充式电化学反应器性能的影响

  4. NHC-Pd化合物在催化溴代苯...

  5. 金属改性芦苇活性炭对重金属的吸附性能研究

  6. 微生物菌剂对污泥好氧发...

  7. 基于醚四酸MOFs的构筑及其对pH的传感

  8. 河岸冲刷和泥沙淤积的监测国内外研究现状

  9. 十二层带中心支撑钢结构...

  10. 乳业同业并购式全产业链...

  11. 酸性水汽提装置总汽提塔设计+CAD图纸

  12. 电站锅炉暖风器设计任务书

  13. 杂拟谷盗体内共生菌沃尔...

  14. 当代大学生慈善意识研究+文献综述

  15. java+mysql车辆管理系统的设计+源代码

  16. 大众媒体对公共政策制定的影响

  17. 中考体育项目与体育教学合理结合的研究

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回