菜单
  

    The goal of  project is to design a processing equipment containing ammonia tail gas, enables the ammonia to recycle effluent not cause air pollution, increase the utilization rate of ammonia to reduce costs and reduce energy consumption. The main source of ammonia are sodium, potassium apparatus evaporation after the double de-composition reaction of ammonia into ammonia, and unorganized emissions as well. From the source, according to the consumption of raw materials, ammonium ions of circular consumption and exhaust emissions and so on, carries on the material balance, equipment selection, in order to adjust the process steps, to design a more reasonable ammonia circulation scheme of environmental protection. Through the process design, to large-scale production.
    With the fast development the chemical industries, chemical products can be seen everywhere, life seems to be inseparable from the chemical products, and therefore chemical process design task is increasingly heavier. First of all, in the chemical production, through the use of chemical knowledge and methods  of  the design, we can realize the reconstruction and expansion of chemical plant, for unit operation equipment, or the entire unit production capacity test and technical and economic indicators to asses, evaluate the process, find the weak link and unreasonable phenomenon and mining production potential, etc. Secondly, from the laboratory research and development to the pilot and finally into commercial operation, can not be separated from the design. To make scientific research achievements into productive forces, also is the realization of industrialization, must combine the scientific research and design of new processes, new products and new equipment development work. So if you want to build a set of good quality, low consumption, high yield of chemical equipment, important prerequisite is to have a high quality, high level design. Improving the design quality and speed of the development of infrastructure construction plays a key role in promoting.
    1.The source of task:
      This design is according to the Tiantan Auxiliaries co, LTD. Shanghai per-sulfate project engineering and ammonia balance process design. Its purpose is to apply what they have learned knowledge of chemical equipment related to production design, a simulation and industrial production, the production equipment for sulfate design to provide the reference. As the simulation design, such as equipment piping layout, explosion-proof electrical design, noise control, emergency fire and factory overall arrangement, etc.
    2.The standards of the design:
      This design reference to the following standards and regulation of the state.
      A. Dangerous and harmful factors classification and code in the production process.(GB/T13816-1992)
      B. Commonly used the classification of dangerous chemical standards.(GB13690-1992)
      C.  Factory fire prevention regulations.(GBJ16-1987)
      D.  Integrated waste water emissions regulations.(GBJ8978)
      E.  Steel pressure level.(GB150)
      F.  Process equipment layout design.(HG20570)
      G.  Chemical plant piping design rules.(HG/T20549)
      H. Typical damage and chemical medium in the pressure vessel explosion dangerous degree classification.(HGJ43-1991)
    I. Chemical construction project environmental protection design rules.(HG20667-2005)
    3.The design principle and main design index
     Principles: (1).Security: a large amount of material in chemical production is inflammable, explosive or toxic. Therefore, the design must fully consider various obvious and potential risk factors, to ensure the personal safety and life safety of production personnel.
      (2). Easy to operate, in each production process and equipment at the same time, to determine reasonable operating conditions were determined. Because it is in the establishment of the production process and equipment and its role play and the scheme of control has a direct relationship.
  1. 上一篇:石墨烯衍生物的制备及组装
  2. 下一篇:日处理20000立方城市污水的处理工艺设计+CAD图纸+答辩PPT
  1. 数字全息术研究铁在酸性...

  2. 污泥好氧发酵过程中多环芳烃变化研究

  3. 污泥好氧发酵过程中壬基酚类物质变化研究

  4. 污泥好氧发酵过程中重金属形态变化研究

  5. 年产300kg吡啶丁磺酸硫酸盐的工艺设计+CAD图纸

  6. ANSYS微推进器阵列低温键合...

  7. 2-甲基-2-硝基-1-丙醇的合成

  8. 十二层带中心支撑钢结构...

  9. java+mysql车辆管理系统的设计+源代码

  10. 大众媒体对公共政策制定的影响

  11. 电站锅炉暖风器设计任务书

  12. 乳业同业并购式全产业链...

  13. 酸性水汽提装置总汽提塔设计+CAD图纸

  14. 杂拟谷盗体内共生菌沃尔...

  15. 中考体育项目与体育教学合理结合的研究

  16. 河岸冲刷和泥沙淤积的监测国内外研究现状

  17. 当代大学生慈善意识研究+文献综述

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回