-
摘要使用4,4´ -二氟二苯酚、9，9´ -双(4-羟基苯基)芴和4,4-(751氟异丙叉)双酚 A，通过嵌段共聚合成了嵌段共聚聚醚砜聚合物。然后以氯甲基乙醚为氯甲基试剂，SnCl4为催化剂，成功实现聚合物的氯甲基化。通过1H NMR 谱计算得到理论IEC值为 1.58 mmol/g。在浇膜过程中，通过加入一定量的三乙烯二胺（DABCO），成功得到了一系列多嵌段接枝交联型阴离子交换膜。通过溶解性的降低，证明了交联结构的形成。测试了交联膜材料的尺寸变化、吸水性、电导率、机械强度及稳定性等性能。结果表明，相对于未交联的bPAES-g-0 膜，具有20%交联度 bPAES-g-20 优异的综合性能，在60oC 水中的离子导电率达到50mS cm-1。在 MFC性能评价结果表明，bPAES-g-20 电阻率为343.64Ω•m ，远低于商用膜（862.62Ω•m） ，证明装置 bPAES-g-20 的MFC 具有更小的内阻。 27379
- 上一篇：阳离子交换膜在微生物燃料电池中的性能研究
- 下一篇：全交联型阴离子交换膜的制备与性能研究
毕业论文关键词 微生物燃料电池 阴离子交换膜 交联 离子电导率
Title The study on the application of anion exchange membrane in microbial fuel cell Abstract A series of multiblock polysulfone polymers (PAES) were prepared from 4,4-difluoro-diphenol ，9,9'-bis (4-hydroxy) fluorene and 4,4 (hexafluoroisopropylidene) Bisphenol A. The - CH2Cl groups were introduced to the PAES chains by Freidel - Crafts reaction from the ClCH2OCH2CH3 under the catalysis of the SnCl4. The ionic exchange capacity (IEC) of the obtained polymer was 1.58 mmol/g, which was calculated from the 1HNMR spectra. The crosslinked structures were formed by the addition of the diamine of DABCO during the membrane casting. The insolubility characteristics in DMAc, NMP and DMF for the diamine treatment membranes ensured the form of the crosslinking structure. The properties of the membranes such as size change, water uptake, ionic conductivity, mechanical properties and stability were measured. The results showed that the membrane with 20% crosslinking ratio of bPAES-g-20 owned the excellent integration performance comparing the un-crosslinking one, which showed the ionic conductivity of 50 mS cm-1 in 60 oC water. During the MFC operation, the MFC equipped bPAES-g-20 membrane showed the electric resistant rate of 343.64Ω•m, which was much lower than that one equipped commercial membrane (862.62Ω•m). Suggesting the lower inner electric resistant of the former. Keywords : Microbial fuel cell Anionic exchange membrane Cross linking treatment ionic conductivity
目 录
1 引言 . 1
1.1 微生物燃料电池 1
1.2 阴离子交换膜 2
1.3 本文研究意义及主要内容 . 4
2 实验部分 6
2.1 实验仪器及设备 6
2.2 原料与试剂 6
2.3 药品的精制 7
2.4 嵌段型聚合物的合成 . 7
2.5 聚合物的氯甲基化 . 8
2.6 膜的制备和处理 9
2.7 性能表征 10
2.8 微生物燃料电池的构建 . 12
3. 结果与讨论 . 13
3.1 阴离子交换膜的制备 . 13
3.2 尺寸变化 14
3.3 核磁测定与IEC 13
3.4 吸水率 15
3.5 电导率 16
3.6 机械强度 17
3.7 稳定性 18
3.8 溶解性 14
3.9 在微生物燃料电池上的应用 . 18
结 论 . 20
-
X70碳钢表面硅烷膜缓蚀作用的研究
-
基于Al/Ni纳米复合薄膜热源...
-
化学改性碳黑作为阴极材...
-
Cu掺杂对Mn-Co尖晶石型化合...
-
聚乙烯醇凹凸棒粘土渗透汽化膜的制备与表征
-
TiO2-纳米凹凸棒石光催化膜制备研究
-
陶瓷膜微滤澄清纤维素酶发酵液实验研究
河岸冲刷和泥沙淤积的监测国内外研究现状
酸性水汽提装置总汽提塔设计+CAD图纸
中考体育项目与体育教学合理结合的研究
乳业同业并购式全产业链...
电站锅炉暖风器设计任务书
杂拟谷盗体内共生菌沃尔...
java+mysql车辆管理系统的设计+源代码
十二层带中心支撑钢结构...
大众媒体对公共政策制定的影响
当代大学生慈善意识研究+文献综述