菜单
  

        (2) Where Fn is the normal component, Rn is the normal component ratio, Ft is the tangential component, and Rt is the tangential force ratio. The various coefficients are experimentally determined by measuring the force for various depths of cut and feed-rate. It showed the presence of average size burrs has minimal effect on the cutting force and the burr is not considered in (2). The tangential cutting force is proportional to the material removal rate (MRR) [7]. When chamfering a 45-deg angle into a part, the MRR can be expressed as: () (1) cc b tool tng toolMRR A A V A R V =+ = +        (3) tng bc RAA =                             (4) Where Ac and Ab denote the cross sectional area of the chamfer and the burr,  Rtng and  Rnorm are the surface area tangential ratio and the normal ratio, respectively, and Vtool is the velocity of the grinding tool along the workpiece edge. The surface area ratios Rtng and Rnorm can be used to determine the tangential and normal force variations[7]. For the worst burrs, (1) can be expressed as (1 ) n n norm F RF R =⋅⋅+ , (1 ) tt tng FRF R =⋅⋅+    (5) From (5), we can know that large variations are expected in the components of the cutting force due to variations in the burr area for a given feedrate and chamfer area. Therefore, constant force control is very limited and several repetitions of deburring procedures are needed. 2  Dynamic model of system 2.1  Dynamic model of the robot In general, a dynamic equation of an n-joint constrained manipulator can be expressed as () (, ) e Dqq hqq τ τ = ++                 
           (6) where,nqR ∈  denotes the joint angle vector; ()nnDq R ×∈论文网 is the non-singular inertia matrix, and (, )nhqq R ∈   is a nonlinear function of the centrifugal, coriolis, gravity and friction force; nR τ ∈ represents the joint torque vector of input control; mnJR ×∈  is the Jacobian matrix connecting the velocities of robot end-effector and the velocities of robot generalized coordinates; me F R ∈  is the external force exerted from the environment to the  end-effector in contact movements.  m is the number of contact force components. The relationship of the velocity and acceleration between joint space and Cartesian space can be expressed as  () x Jqq =    ,  () x Jqq Jq = +                             (7) From (6) and (7) the robot dynamic equation model in Cartesian space can be obtained as ** e D xh FF + =−                            (8) Where 11* TDJDJ−−= , 11** ThJhDJJx−−=−     . Let  () x q  denote the position vector of the end effector of the manipulator. The geometrical constraint can be modeled by (()) 0 x q φ ≤                               (9) To express  fn and  ft on the chamfer surface, we define two unit orthogonal vectors,  n(x) and  t(x), represent the unit vector normal to the constraint surface and tangential to constraint surface, respectively. These two vectors are given by , ) ( / ) ( ) ( x x x nTφ φ ∇ ∇ = x x x t     / ) ( =             (10) The external force, Fe, given in (8) is the contact force due to the constraint, and can be written as () () entF nx f tx f = +                       (11) 2.2 Impedance control Impedance control is a general approach to robot motion and force control that attempts to make a manipulator behave as a mass-spring-dashpot system whose parameters can be specified arbitrarily. The desired impedance property of the end-effector can be given as de M XBXKXF F + +=−      +++           
  1. 上一篇:并联组合凸轮机构设计英文文献和中文翻译
  2. 下一篇:氧化锌纳米材料的合成英文文献和中文翻译
  1. 汽车乘员舱的声振耦合英文文献和中文翻译

  2. 立体光照成型的注塑模具...

  3. 低频振动的铁路车轴的状...

  4. 接头的形状对沥青塞接头...

  5. 电-气动驱动的垂直计算机...

  6. 开口端纺纱系统中的锥形...

  7. 木质填料聚丙烯复合材料...

  8. 酸性水汽提装置总汽提塔设计+CAD图纸

  9. 中考体育项目与体育教学合理结合的研究

  10. 乳业同业并购式全产业链...

  11. java+mysql车辆管理系统的设计+源代码

  12. 当代大学生慈善意识研究+文献综述

  13. 电站锅炉暖风器设计任务书

  14. 河岸冲刷和泥沙淤积的监测国内外研究现状

  15. 十二层带中心支撑钢结构...

  16. 大众媒体对公共政策制定的影响

  17. 杂拟谷盗体内共生菌沃尔...

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回