- 上一篇：滑动窗FFT递推算法研究+MATLAB仿真程序
- 下一篇：二维扫描APD光子计数成像技术研究
摘要线性调频测距测速是现代武器系统中最常用的一种方法，连续波线性调频通过测量获得回波与发射波的频率差来计算探测器与目标之间的距离和速率信息,不依靠回波幅度定位，有一定的距离选择能力,精度高,抗干扰性能好。42467
Field Programmable Gate Arrays即FPGA，是一种现场可编程门阵列，是可编程使用的信号处理器件，不仅提高了电路性能，极大减少了印刷电路板设计工作量以及难度，而且大大增加了设计的灵活性以及效率。由于电子技术水平的快速发展，FPGA技术已在快速信号处理中获得普遍应用。
本文依据MATLAB的仿真结果验证设计的可行性，在Altera公司的Cyclone芯片及其开发软件QuartusII基础上完成了发射端三角波信号的产生和接收端混频采样后的快速傅里叶变换（FFT）等相关计算，详细交代了各部分的原理和效果图。
关键词 连续波 线性调频 FPGA FFT 数字信号处理
毕业论文设计说明书外文摘要
Title Signal processing technology of ranging and ranging rate using LFMCW based on FPGA
Abstract
System of ranging and ranging rate using LFMCW is widely used in modern weapon.
LFMCW confirms the distance and speed of target by measuring the frequency difference between transmit signal and return signal, having nothing with the amplitude of return signal.It has high range resolution and anti-disturbance capability.
As a programmable signal processing device, FPGA improves the performance of circuits and decreases the work and difficulty of printing circuits.In addition, FPGA increases the flexibility and efficiency of design.With the development of electronic technology, FPGA has been extensively used in fast signal processing.
The article verifies the feasibility of design according to the simulation results using MATLAB. Based on the Cyclone chip and QuartusII developed by Altera, the article also finishes the generation of triangular signal in the transmitter and FFT of data sampled in the receiving, giving a detailed introduction of theories and results of each part.
Keywords LFMCW FPGA FFT digital signal processing
目 次
1 绪论 1
1.1 研究背景 1
1.1.1 无线电探测发展背景 1
1.1.2 本文研究意义 1
1.2 本文结构安排 2
2 调频信号处理的软件和硬件平台 3
2.1 FPGA简介 3
2.1.1 FPGA定义与发展 3
2.1.2 FPGA工作原理与结构 3
2.2 Cyclone系列芯片 4
2.3 Verilog HDL语言 5
2.4 Quartus II概述 5
2.5 MATLAB简介 5
2.6 本章小结 6
3 线性调频测距测速理论基础 7
3.1 三角波线性调频体制 7
3.2 锯齿波线性调频体制 9
3.3 本章小结 9
4 系统整体实现 10
4.1 三角波线性调频探测器整体实现 10
4.2 Simulink建模框图