菜单
  
    摘要:曲轴的作用是将活塞的往复直线运动通过连杆转化为旋转运动,从而实现发动机由化学能转变为机械能的输出。发动机是影响汽车性能的主要部件,而曲轴又是影响发动机性能的主要零件,曲轴质量的好坏直接影响到汽车发动机的性能和使用寿命。曲轴在使用过程中承担源源不断的交变载荷,输出足够的功率来保证汽车的运行。长时间的高速运转加剧连杆轴颈的磨损,要防止曲轴发生突然的损坏。在曲轴工作的过程中,要尽量保证曲轴的工作回转轴心要与曲轴主轴颈的中心线重合,避免发动机内部产生振动,影响汽车的性能。因此要求曲轴材质具有足够高的刚性、疲劳强度和良好的耐磨性能,设计时要合理控制平衡块的质量,在加工之后应适当进行表面处理来降低曲轴的表面粗糙度,提高表面硬度。37717
    本课题是对汽车751缸发动机曲轴的加工工艺分析和夹具设计进行探讨。曲轴工艺路线的拟定是工艺规程制订中的关键阶段,是工艺规程制订的总体设计。所撰写的工艺路线合理与否,不但影响加工质量和生产率,而且影响到工人、设备、工艺装备及生产场地等的合理利用,从而影响生产成本。
    所以,本次设计是在仔细分析曲轴零件加工技术要求及加工精度后,合理确定毛坯类型,经过查阅相关参考书、手册、图表、标准等技术资料,确定各工序的定位基准、机械加工余量、工序尺寸及公差,最终制定出曲轴零件的加工工序卡片。
    毕业论文关键词: 发动机;曲轴;工艺分析;工艺设计
    The processing technology of the automobile engine of six cylinders crankshaft and fixture design
    Abstract:Is the role of the crankshaft of a piston reciprocating linear motion through the connecting rod into rotary motion, so as to realize the output of engine by chemical energy into mechanical energy? Is a major part of the property of automobile engine, the crankshaft is the main components affecting the engine performance, the crankshaft quality directly affect the car engine performance and service life. Crankshaft in use process for a steady stream of alternating load, the output enough power to ensure that the operation of the car. For a long time the high speed increase of connecting rod journal wear, to prevent damage of crankshaft occur suddenly. In the process of crankshaft work, try to ensure that the crankshaft in the axis of rotation to work with the centerline of the crankshaft main journal, avoid engine vibration is generated; affect the performance of the car. So the requirement of the crankshaft material has high enough rigidity, fatigue strength and good wear resistance, reasonable design to control the quality of the balance block, after the processing surface treatments should be appropriate to reduce the surface roughness of the crankshaft, improve surface hardness.
    This topic is for car six-cylinder engine crankshaft machining process analysis and fixture design are discussed. The proposed process routes of the crankshaft is the key stage in process regulation, process planning is to formulate the overall design. Written process is reasonable or not, not only affects the processing quality and productivity, and affect the workers, equipment, process equipment and production areas such as reasonable use, thus affecting the cost of production.
    So that the design is on the careful analysis of the crankshaft parts processing technical requirements and processing accuracy, reasonable blank type, after consult reference books, manuals, charts, standard and other technical data, determine the locating datum of each process, machining allowance, process dimension and tolerance, and ultimately to develop a crankshaft parts machining process card.
    Keywords: engine ;crankshaft;Process Analysis ;Process design
    目录
    2015届本科生毕业设计(论文)    1
  1. 上一篇:煤油凝胶冲压发动机点火器设计及其试验研究
  2. 下一篇:深沟球轴承外圈沟道直径测量系统设计+CAD图纸
  1. UG某型汽车零件结构刚度分析

  2. 汽车后桥横臂式悬挂系统设计+CAD图纸

  3. 发动机润滑油对汽车NVH性能的影响研究

  4. UG汽车遥控器下壳注塑模具设计+CAD图纸

  5. 单体液压支柱密封质量检测仪的设计+CAD图纸

  6. QCS014液压实验台的改造+CAD图纸+程序

  7. MATLAB某反后坐装置的优化设计

  8. 河岸冲刷和泥沙淤积的监测国内外研究现状

  9. 杂拟谷盗体内共生菌沃尔...

  10. 中考体育项目与体育教学合理结合的研究

  11. 十二层带中心支撑钢结构...

  12. 乳业同业并购式全产业链...

  13. java+mysql车辆管理系统的设计+源代码

  14. 当代大学生慈善意识研究+文献综述

  15. 酸性水汽提装置总汽提塔设计+CAD图纸

  16. 电站锅炉暖风器设计任务书

  17. 大众媒体对公共政策制定的影响

  

About

751论文网手机版...

主页:http://www.751com.cn

关闭返回