摘要LSCM是一种较为成熟的钙钛矿型电极材料, Ba掺杂的LSCM其电性能将很大程度得到提高。本文采用溶胶凝胶法合成一系列Ba掺杂的LSCM ( La0.75Sr0.25-xBaxCr0.5Mn0.5O3 ,x=0, 0.1, 0.15, 0.2, 0.25 ) 对称电极,通过X射线衍射 ( XRD ) 表征,显示煅烧后得到的材料均具有典型的钙钛矿晶型,且与电解质YSZ化学相容性较好;通过SEM观察其微观形态,具备作为电极材料所必须的多孔性特征;对一系列电极材料进行电导率测试,材料的电导率随温度升高而增大;以x=0.15, 0.25为研究对象的LSBCM|YSZ|LSBCM电池体系,在2% H2S气氛下测试其电性能,其中x=0.25在900 ℃时,最大输出电功率可达15.5mW/cm2.60919
毕业论文关键词 H2S-SOFC, Ba掺杂,对称电极,耐硫,电性能
毕业设计说明书(论文)外文摘要
Title Synthesis of Ba-substituted LSCM symmetrical electrode material for symmetric solid oxide fuel cell with H2S-containing fuel
Abstract
LSCM is a relatively mature perovskite type electrode material. Barium-substituted for strontium in LSCM can greatly change the electric properties of electrode materials. In this paper, a series of Ba-substituted symmetric electrodes La0.75Sr0.25-xBaxCr0.5Mn0.5O3 (x=0, 0.1, 0.15, 0.2 and 0.25) was synthesized by sol-gel method. The structure were characterized by XRD, and they all exhibited orthorhombic perovskite-type structure and good chemical compatibility with YSZ. The microstructures were characterized by SEM, and they all had the porosity. On a range of electrode materials for electrical conductivity tests, which reflect the material conductivity, increased with the increased temperature. Battery system LSBCM | YSZ | LSBCM about x = 0.15 and 0.25 as the research object, and the maximum output power of x = 0.25 could reach 15.5 mW/cm2 in 2% H2S at 900 ℃.
Keywords H2S-SOFC, Ba-substitution , symmetrical electrode , sulfur tolerance , electric properties
目 录
摘要 Ⅰ
Abstract Ⅱ
1 引言 1
1.1课题研究背景 1
1.2燃料电池简介 2
1.2.1燃料电池组成及分类 2
1.2.2 SOFC工作原理 2
1.3 SOFC电池材料 3
1.3.1 电解质材料 3
1.3.2固体氧化物燃料电池的阳极材料 4
1.3.3固体氧化物燃料电池的阴极材料 4
2 La0.75Sr0.25-xBaxCr0.5Mn0.5O3系列电极材料的制备及性能研究 6
2.1 La0.75Sr2.5-xBaxCr0.5Mn0.5O3系列电极材料的制备 7
2.1.1 实验药品及仪器 7
2.1. 2 La0.75Sr2.5-xBaxCr0.5Mn0.5O3系列电极材料的制备方法 8
2.2 La0.75Sr2.5-xBaxCr0.5Mn0.5O3系列电极材料的表征 9
2.2.1 La0.75Sr0.25-xBaxCr0.5Mn0.5O3的物相分析 10
2.2.2化学相容性测试 11
2.2.3 H2S条件下稳定性测试 14
2.2.4电导率测试 18
3 固体氧化物燃料电池的制备及性能测试 21
3.1固体氧化物燃料电池的制备 21
3.1.1 实验药品及仪器 21