-
The overall goal of this project was to advance the state-of-the-art in GPR techniques so that it can become a more practical and reliable tool for assessing the integrity of reinforced concrete bridge decks, with particular attention directed towards the specific problems of the bridges in New England. This project was conducted with funding by the New England Transportation Consortium (NETC) Project 94-2 “Nondestructive Testing of Reinforced Concrete Bridges Using Radar Imaging Techniques.” The project involved numerical, laboratory and field studies of GPR interactions with reinforced concrete roadways. 21607
- 上一篇：冷却系统研究及注射模设计英文文献和中文翻译
- 下一篇：建筑热舒适性英文文献和中文翻译
A multidisciplinary team of investigators with experience in GPR, electromagnetics, structural engineering and scientific instrument development, from the University of Vermont and consultants from Massachusetts worked on the project. The investigators from the University of Vermont included Professors Dryver R. Huston and Prof. Peter L. Fuhr and several graduate and undergraduate students. The Massachusetts-based investigators were Dr. Kenneth Maser of Infrasense, Inc. and Dr. William Weedon of Applied Radar, Inc.
The overall result of the project was that most of the proposed objectives were met. A working high-frequency (0.5 – 6.0 GHz) system was built and tested on damaged and undamaged slabs in both the laboratory and the field. Damage in the form of thin air-filled delaminations and accelerated corrosion was identified in the laboratory. The field results are a little less certain because of the unknown state of the underlying roadway. The state of the art for GPR has advanced considerably in the past several years. Some of the modern imaging techniques show promise for routine use in GPR surveys of bridge decks. It is recommended that future GPR systems for roadways operate at frequencies above 2 GHz and that they include synthetic aperture radar imaging techniques.
The bridge infrastructure of the United States is distressed. The United States Department of Transportation estimated in early 1994 that as many as 40% of the total number of bridges in this country are structurally deficient, with repair costs estimated in the billions of dollars (Smith, 1995; and Halabe et al. 1995). The leading cause is the deterioration of the bridge deck. Deterioration is due primarily to two mechanisms: 1) Freeze/thaw damage to the concrete (punky concrete), and 2) Corrosion-induced delamination resulting from infiltration of chlorides introduced by winter road salting operations or by ocean spray. Unfortunately, bridge deterioration – including rebar corrosion, delaminations and disintegrating concrete – is often hidden under an asphalt overlay (Maser and Kim Roddis, 1990). Efficiently managing maintenance activities for bridge decks requires tools that can assess the integrity or state of deterioration. One of the major problems with concrete deterioration is that its severity and extent is difficult to assess. The mechanisms of deterioration occur below the surface, and their manifestations are not readily seen in visual inspections. Consequently, agencies are forced to program, prioritize, and set budgets for the repair and replacement of many structures whose conditions are virtually unknown. This has led to "surprises" during construction, and to cost overruns and excess repairs.
Current techniques for condition assessment are slow, labor intensive, intrusive to traffic, and do not produce an accurate estimate of the quantity of deteriorated concrete. These techniques, which include core sampling, corrosion (half-cell) potentials, and chloride ion measurements, are well documented (NCHRP, 1979). Corrosion potentials and chloride ion measurements infer corrosion, but do not address unseen freeze/thaw damage. A more reliable technique, the chain drag, does not work with either asphalt overlays or in heavy traffic conditions with high ambient noise. Alternative non-destructive evaluation (NDE) techniques offer the possibility of more efficiently and effectively assessing the state of a bridge deck.
-
数控加工技术英文文献和中文翻译
-
CAD/CAM模具技术课程教学改...
-
Java技术的Web应用设计模型...
-
JSP技术简介及特点英文文献和中文翻译
-
JSP技术概述英文文献和中文翻译
-
Servlet和JSP技术概述英文文献和中文翻译
-
数控技术的发展趋势英文文献和中文翻译
十二层带中心支撑钢结构...
电站锅炉暖风器设计任务书
当代大学生慈善意识研究+文献综述
java+mysql车辆管理系统的设计+源代码
河岸冲刷和泥沙淤积的监测国内外研究现状
大众媒体对公共政策制定的影响
中考体育项目与体育教学合理结合的研究
乳业同业并购式全产业链...
酸性水汽提装置总汽提塔设计+CAD图纸
杂拟谷盗体内共生菌沃尔...