-
摘要近年来，非晶合金的研究取得了重大进展，经过近三十年的努力，人们开发出了大量的非晶态合金系统。因此，无论在理论上还是实际中深入研究非晶合金的抗腐蚀性能都具有相当重要的意义。本文利用真空电弧炉、单铜辊喷注甩带设备、电化学分析测试仪、Bruker D8 X射线衍射仪等设备手段，制备 Ti60Cu40-x Nix（x=1,5,10）非晶合金，并研究了其在不同腐蚀溶液中的腐蚀行为。 分别利用动态极化曲线法、电化学阻抗技术(EIS)研究了 Ti60Cu40-x Nix（x=1,5,10）非晶合金在0.144mol/L的NaCI溶液、 0.1mol/L 的H2SO4以及0.5mol/L的NaOH溶液中的腐蚀行为。 极化曲线结果显示，在 0.144mol/L 的 NaCl 溶液中，非晶合金 Ti60Cu40-x Nix（x=1,5,10）自发钝化，具有较低的钝化电流密度，在 10-5～10-6A/cm2，钝化区间在450mV～700mV之间，同时 Ni 含量的增加可以有效增加点蚀电位；在 0.1mol/L 的H2SO4和 0.5mol/L 的NaOH溶液中， Ti60Cu40-x Nix （x=1,5,10） 非晶合金成分对腐蚀行为影响不大，三种样品均具有较宽的钝化区间。 28466
- 上一篇：deform-3d汽车活塞销反挤压成形工艺研究
- 下一篇：基于二维锑原子晶体的场效应晶体管
毕业论文关键词 非晶合金；腐蚀；电化学性能；钛合金
Title The effect of Ni-addition on the corrosion behavior of Ti-based metallic glasses
Abstract Recently，the research on the amorphous alloys have attracted much interesting due to their excellent properties．It is quite important to further study the corrosion behavior of the amorphous alloys in theory and application．Ti60Cu40-x Nix（x=1,5,10）amorphous alloys were prepared by arc-melting method and melt spinning. The microstructure of prepared amorphous alloys was analyzed by X-ray diffraction (XRD). The corrosion behaviors of Ti60Cu40-x Nix（x=1,5,10） amorphous alloys in 0.144 mol/L NaCl solution, 0.1 mol/L H2SO4 solution and 0.5 mol/L NaOH solution were studied by the potentiodynamic polarization curves and electrochemical impedance spectrum (EIS). As the potentiodynamic polarization curves shows, in 0.144 mol/L NaCl solution, the amorphous alloy Ti60Cu40-x Nix （x=1,5,10） exhibits spontaneous passivation, with a lower passive current density, from 10-5 A / cm2 to 10 -6A / cm2, and the passive potential region between 450mV and 700mV. Meanwhile the increasing of Ni content can effectively increase the pitting potential. In 0.1 mol/L H2SO4 and 0.5 mol/L NaOH solutions, the alloy composition of the Ti-Cu-Ni amorphous alloy has little effect on the corrosion behavior. Furthermore, all the three samples exhibit a wide passive potential region during the anodic polarization process.
Keywords Ti-based amorphous alloy; corrosion; electrochemical properties;
目次
1绪论..1
2钛基非晶合金发展史及性能2
2.1钛基非晶合金的发展史2
2.2钛基非晶合金的性能..2
2.3非晶合金的腐蚀性能..2
2.3.1金属的腐蚀理论..2
2.3.2金属钝化理论.3
2.3.3影响电化学腐蚀的因素..3
2.4添加的元素对非晶合金腐蚀的影响..4
2.5镍的耐蚀性分析5
3实验方法和测试技术6
3.1实验材料6
3.2制备工艺6
3.2.1母合金的熔炼..6
3.2.2非晶合金试样的制备.6
3.3实验设备与实验试剂..7
3.3.1电化学分析测试仪7
3.3.2三电极系统7
3.3.3实验试剂..8
3.4结构测试分析..8
4镍对钛基非晶合金腐蚀行为的影响9
4.1合金化学成分设计.9
4.2制备过程9
4.3样品的测试分析9